Review of Wayne SPF50 ½ hp thermoplastic sump pump

WAYNE SPF50Water logging is a very common problem faced by the people who live in low lying areas. Accumulated water can be removed from the water collecting sump basin in the basement of the houses by using a sump pump. If you have a very low basement, then natural groundwater on rainwater can cause basement flooding. Water logging is caused when water enters into the basement through the perimeter drains of a basement proofing system.

People use sump pumps mainly where basement flooding is a regular problem. Dampness problem can be solved by the sump pump where the foundation of a house is below the water table. Water is sent away by a sump pump to places such as dry well or a municipal storm drain. Though there are many sump pumps available in the market, but the Wayne SPF ½ HP Thermoplastic Sump Pump with Integrated Vertical Float Switch is one of the best sump pumps that you can buy.

About Wayne

Residential worry free water handling solutions are provided by the Wayne water systems. This market leading sump pump company is actually a division of the Scott Fetzer Company. This company is situated in Harrison, Ohio. It has a huge experience of over 80 years.

Security and confidence are provided to the house owners by the Wayne branded sump pumps for several years. Basements are kept dry, sewage systems and wells work well and outdoor areas, pool and lawns are also keep dry by the Wayne SPF ½ HP Thermoplastic Sump Pump.

Assembled in the USA

Up to 3900 gallons per hour (gph) can be moved by the Wayne SPF submersible sump pump. Debris is filtered, clogging is minimized and the need for a weep hole is eliminated by the top section design of this sump pump. High performance 1/2 HP motor, an epoxy coated steel and integrated float switch design are consisted of by this sump pump. Long lasting performance is also guaranteed by it. Larger pump pits and 11 inch diameter are ideal spaces for its installation due to its small, compact size.

Some of the unique features of this sump pump are given as follows –

  • Domestic and foreign components are used to make the WAYNE SPF50 submersible sump pump.
  • It is assembled in the USA.
  • 1 million cycles are tested by the sump pump.
  • Air locks and clogging of the debris in the bottom of sump pit are eliminated by the top suction pump design of this Wayne sump pump.
  • It comes with thermoplastic, corrosion resistant and epoxy coated steel motor housing pump base.
  • 3900 gallons per hour is the maximum flow rate of this sump pump. It is of 1/2 HP with 2800 gallons per hour at 10 feet of discharge lift.
  • This sump pump is designed to use in larger sump basins or of 11 inch diameter sump basins.
  • The ON and OFF level of this sump pump are 9 inches and 4 inches respectively.
  • It is a fully submersible sump pump.
  • NPT discharge of this Wayne is 1- ½ inch.
  • It comes with an integrated vertical float switch.
  • It comes with a warranty of 1 year.
  • China manufactures this WAYNE sump pump.
  • It is a durable sump pump that can be used easily.
  • This sump pump can easily be installed by you.
  • Leaks and galvanic corrosion are prevented by the cast iron seal plate of this sump pump.
  • The weight of the product is 15 pounds.
  • 8×8×12 inches are its dimensions.
  • Part number and item model number of this sump pump is SPF50.
  • It has a style of ½ HP.
  • Corded-electric is the power source for running this sump pump.
  • 100 volts is the required voltage of this submersible sump pump.
  • As batteries are not required, so no battery is included in the set.
  • It comes with 1 year of manufacturer’s warranty.
  • This sump pump has got 3.9 stars out of 5 stars as customer reviews.
  • It ranks 114982 in the best seller’s list.
  • 2 pounds is the shipping weight of this item.

To conclude, do a good research before buying a submersible sump pump. The WAYNE SPF50 ½ HP Thermoplastic Sump Pump can also be bought by you due to its amazing features.

Leave a Reply

Your email address will not be published. Required fields are marked *