Are you looking for a sump pump that can help you to get rid of the flood water accumulated in your area or basement? There are a number of varieties in best pedestal sump pumps that you can trust on. Among many such varieties, one of the most common ones is the pedestal sump pump. If you are searching for the best brand and model in such sump pumps, then you can go through this list of 5 pedestal sump pumps and can select any one based on the features and functionality of the pumps.
Top 5 Best Pedestal Sump Pump Comparison Chart
Zoeller 84-0001 Old Faithful 84 Pedestal Pump, 1/2 HP, 115V
Item Weight : 23.3 pounds
Product Dimensions : 9.5 x 9.5 x 32.5 inches
Customer Reviews : 3+
Flotec FPPM3600D-01/09 1/3 HP Pedestal Sump Pump
Item Weight : 11.3 pounds
Product Dimensions : 6 x 33 x 6 inches
Customer Reviews : 54+
Wayne SPV500 1/3 HP 3,100 GPH Pedestal Sump Pump, Cast Iron
Item Weight : 21.8 pounds
Product Dimensions : 8 x 8 x 34 inches
Customer Reviews : 20+
Superior Pump 92301 1/3 HP Cast Iron Pedestal Pump
The sump pump has these amazing features to be highlighted.
The pump is metal enclosed and have the protection from thermal overload. It has split motor and is lubricated permanently.
The base of the pump housing is of either cast iron or of thermoplastic that is of heavy duty.
It has a minimum cycle of 4” and a maximum of 16”.
This particular model of sump pump is extremely efficient in indoor areas such as basements of residents. The motor is that located at the top of the pit cover so that it can stay protected from water. The pump can be very much effective as an option that can transfer water in case of various occasions such as basement work. The top of it also acts as a strainer to pass lint that is present in the water. The whole system is properly tested in the factory and hence the quality can be ensured and reliable for many years.
This particular model of sump pump comes handy with the following features:
The model pumps out about 3480 gallons of water each hour.
It has a motor of 1/3 HP that is of heavy duty.
It comes with 3 number prong plugs and a grounded cord of 6’.
It has an inlet of discharge 1-1/4”.
This particular model has been manufactured in the United States and is made up of material plastic and cast iron. With a measurement of 33” height and 8” width, the pump also has a depth of about 7” that makes the pump weigh somewhere around 17 lbs. With such measurements, the pump can easily pump out around 3480 gallons of water in every hour and hence can be very much beneficial for your basement and underground warehouses.
The model is from a known brand called Wayne that is trusted by a number of customers by now. This particular model from Wayne offers you a number of features such as the following:
The pump comes with cast iron housing that is quite durable in nature.
Over the cast iron, there is a coat of steel and the fasteners are also made of stainless steel so that it can stay protected from corrosion and can be strong.
The discharge capacity of the pump is about 1-1/2 inch NPT.
The float switches offer proper options of on and off that can be used for many years.
The whole system is protected thermally, and the motor is powerful enough to be durable.
If you are going to this particular model of sumo pedestal sump pump, you will be able to replace your other submersible pumps and that also any kind of much change made. The pump is manufactured by the USA and has a rugged cast iron look. The pump can be easily installed with simple methods. It is known to pump out about 3100 gallons of water each hour that is known to be a decent amount. It comes from quite a reliable brand and also, the model is by now quite a reliable one among other customers.
The model from Superior Pumps comes along with a number of attractive features as listed below:
The pump has a base of cast iron.
It is featured with an automatic switch that can be adjusted fully.
The switch arm is made of metal that provides durability and strength.
It can be used in sump basins that are as large as 12” or more.
The pump offers high capacity pumping as much as 1-1/2”.
The float ball, impeller, and the drive shaft are made of stainless steel that is non-corrosive.
It can handle liquid temperature till a limit of 180 degrees
With an amazing number of features, the sump pump offers to pump out about 50 gallons of water in just one minute. The pump comes with hardware finish of the colors silver and black and can be measured at 36” high and 8.5” wide. The 25 lbs weighted sump pump comes along with a durability to serve many coming years with excellence.
Here comes another model from the big brand Wayne. The name is enough to gain a trust in the model, but the features are also such that you will surely like it.
It has a motor of ½ HP with a volt of 115V.
It also has a discharge capacity of 1-1/2” FPT.
The pump has on and off level switches that are quite adjustable.
The pump is made up of cast iron and has float switches that are vertical and can be adjusted easily to fit with the operating cycle change. The pump is designed to a proper suction function that helps in filtering the debris so that clogging can be prevented. The model has been designed in such a way that it can be installed easily without much of difficulty. Though the base is of cast iron but the hardware is coated with stainless steel. The pump is measured at 34.3” height, 6.5” width and depth of 9”. It has a weight of about 27 lbs.
Next time when you are searching for a proper sump pump, one of the kinds that you can select is the pedestal sump pump. If you are not sure about which pedestal sump pumps can be the best for you, here are the best 5 listed above. All the pumps belong to some of the most known brands that offer a sense of reliability. Also, the features in each sump pump are such that can help you to a great extent in your basement or warehouse to pump out a heavy amount of water. Have a look at these amazing models from the best brands and choose the one that suits you the best.