Looking for the Best Quality Sump Pump ever? This guide will compare the top 10 submersible pumps of 2017 and help you choose the best!

no Image Name Type GPH HP Warranty Where to buy
1 WAYNE CDU980E WAYNE CDU980E Submersible 4600 GPH 3/4 hp 5-year
2 Wayne CDU800 Wayne CDU800 Submersible 4200 GPH 1/2 HP 3-year
3 WAYNE WSS30V WAYNE WSS30V Primary and Battery Backup Combination 4200 GPH 1/2 HP 3-year
4 Zoeller M53 Submersible 2700 GPH 1/3 HP 1-year
5 Wayne CDU790 Wayne CDU790 Submersible 3800 GPH 1/3 HP 3-year
6 Zoeller M63 PREMIUM SERIES Zoeller M63 PREMIUM SERIES Submersible 4300 GPH 1/3 HP 5-year
7 Superior Pump 91250 Utility 1800 GPH 1/4 HP 1-year
8 Wayne Water Systems VIP50 Wayne Water Systems VIP50 Submersible 2600 GPH 1/2 HP 1 year
9 Liberty Pumps 257 Liberty Pumps 257 Submersible 3800 GPH 1/3 HP 3-year
10 Zoeller M57 Zoeller M57 Submersible 2700 GPH 1/3 HP 1-year

What’s The Best Sump Pump in 2017?

Looking for the Best-Rated Sump Pump? Now-a-days with the varieties in the weather due to unseasonal storms, hurricanes, flash floods due to torrential rain etc., flooding is a common issue. In these unpleasant weather conditions, the importance of a sump pump in maintaining the safety of the affected property is a wise investment. A flooded basement due to a burst pipe or overflowing water machine accumulates unnecessary water. This problem is addressed through a backup system and sump pump. However, for water related issues, just about any sump pump can be utilized. Only for one’s personal sump pit problem, that particular kind of pump set is necessarily required. Let’s explore them right away.


Best Sump Pumps – List of Top 10

Top 10 Best Submersible Sump Pumps

  1. WAYNE CDU980E Submersible Sump Pump
  2. WAYNE CDU800 Submersible Sump Pump
  3. WAYNE WSS30V Primary and Battery Backup Combination Sump Pump System
  4. Zoeller M53 Mighty-Mate Submersible Sump Pump
  5. Zoeller M63 PREMIUM SERIES
  6. Superior Pump 91250 1/4 Horse Power Submersible Utility Pump
  7. WAYNE Water Systems VIP50 Submersible Utility Water Pump
  8. WAYNE EEAUP250 Submersible Pump
  9. Zoeller M57 Basement High Capacity Sump Pump
  10. Zoeller 507-0011 Pro Pak 98 Backup Pump System W/Basement Sentry


Types of Sump Pumps

The best type of sump pump depends on what type one is searching for. So, a brief introduction to the various types of sump pumps is necessary for beginners.

Movable Floor Sucker Utility Sump Pump – Leaves no deposits: Excluding getting rid of sump, this pump also leaves the area dry as well as clean.

Pedestal Sump Pump – Less problems: It’s easier to maintain since the mechanical parts are situated on the top. Alternatively, the noise can be dealt afterwards.

Submersible Sump Pump – Clear-cut and easy: Just about the simplest operating sump pump available. It pumps out water from the base of the collected pool of water and forces it into the surrounding drainage system.

Backup Sump Pump – Reduces Collateral Damage: For a lot of valuable assets like flat screen television, very costly carpeting etc this pump is of immense value to have at home. No one wants a power outage to flood their house.

Water Powered Sump Pump – Functions like straw: This pump can be thought of similar to a straw which sucks out the drink from the beaker. Precisely, its functions are described the same way. It draws out water from the top of the sump.




WAYNE CDU980E 3/4 HP Submersible Cast Iron and Stainless Steel Sump Pump With Integrated Vertical Float Switch


The WAYNE CDU980E Submersible Cast Iron and Stainless Steel Sump Pump with Vertical Float Switch is a reliable and high quality sump pump. Its specifications are:

  • Product Dimension: 8 x 8 x 12”
  • Horse Power: 3/4 HP, 115 volts
  • Product Weight: 22 pounds
  • Gallons Per Hour: 4600 GPH
  • Switch Type: Vertical Float
  • Discharge: 1-1/2” NPT
  • Warranty: 5 years support warranty

Important features of the product

Design and Quality Structure: Due to its short and proficient switch design, this pump is most compatible. Its larger float and thicker motor covering equally balances a slight discharge rise in width due to the proximity to the body of the sump pump.

Discharge, Power Cable and Handle: The pump has a 1-1/2” NPT discharge which ensures it doesn’t get blocked or damaged. A stainless steel handle is provided for better handling facility.

Sealing and Motor: The pump is sealed air tight that splits the important circuitry and motor from outside contact with water. It provides a 2HP motor and a maximum flow rate of 4600 gallons per hour.

Switch and Impeller Assembly: The pumps impeller, though made of cast iron, is light on the product. The switch protection and switch assembly consists of a strong polypropylene float that is adequately light and supports slight changes is the level of water. The switch functions automatically by the movement of the stainless steel support attaching the float.

Benefits of the product

  • Sturdy stainless steel covering
  • Water proof power cable protect short circuits
Manufacturer Wayne
Model CDU980E
Image WAYNE CDU980E Sump Pump
Type AC/Battery-powered submersible sump pump
Suitable for Primary and backup sump pump
Product Details 3/4 HP, 115 volts, 22 lbs., 4600 GPH
Warranty 5 years support warranty



WAYNE CDU800 1/2 HP Submersible Cast Iron and Steel Sump Pump With Integrated Vertical Float Switch

Wayne CDU800

The WAYNE CDU800 Submersible Cast Iron and Steel Sump Pump is widely popular. Cast iron base, cast iron pump housing and a top cover of thermoplastic forms the framework of the CDU800 Submersible Sump Pump. The vertical float switch along with the steel guard has been designed with such precision, protruding from the top of the pump, that it protects the float from ever getting caught on the basin wall. The float arm rises to a specified height with rising water, which triggers the switch turning the pump on.

  • Assembled in the US with foreign and domestic parts.
  • Tested to 1 million cycles*
  • Designed for use in sump pits of at least 11 inches
  • Ceramic mechanical seal for work in demanding environments
  • 1-1/2-inch discharges for maximum flow
  • 3-Year limited warranty
  • 1/2 hp submersible sump pump made of durable cast iron

Benefits of the product

  • The CDU800 is easy to install.
  • It is much quieter than most of the other sum pumps. All one can hear during its operation is a slow hum.
  • The float is positive and reliable.
  • Removes water faster than most other sump pumps in the market.
  • Overall, it is a well-made, heavy duty and very efficient sump pump.
Manufacturer Wayne
Model CDU800
Image WAYNE CDU800 Sump Pump
Type AC/Battery-powered submersible sump pump
Suitable for Primary and backup sump pump
Product Details 1/2 HP, 115 volts, 18.5 lbs., 4200 GPH
Warranty 3 years limited warranty



Superior Pump 1/4-Horse Power-Thermoplastic-Submersible Utility Pump

superior pump

The Superior Pump 1/4-Horse Power-Thermoplastic-Submersible Utility Pump is energy efficient, long lasting and strong with a powerful motor. Its specifications are:

  • Product Weight: 7.2 pounds
  • Horse Power: 1/4 HP
  • Amps: 3.8
  • Power Source: Electric
  • Gallons Per Minute: 30 GPM
  • Switch Type: Tethered
  • Discharge Size: 1-1/4 inches
  • Product Dimension: 7 x 7 x 12’
  • Colour: Black
  • Discharge Type: Top
  • Origin of Components: Local and import
  • Country Assembled in: USA
  • Warranty: 1 year support warranty

Some important features of the product

Reliable, consistent design for commercial use: Completely submersible, this pump is ideally suitable for pumping water from flooded basements, swimming pools and fountains. It is able to lift water to a vertical height of 25 feet and moves 30 gallons in 60 seconds. It has the ability to whip up 1/8 inch of water from the floor and used like a sump pump by adding a float switch.

Non-stop motor for tough works: Best performance for tough jobs, this highly efficient, thermally protective, split capacity, uninterrupted duty motor supplies the necessary power.

Durable, compact, rough design: This non corrosive submersible pump is used repeatedly due to its thermoplastic durable structure. Even with an opening 6 inches small, the pump fits comfortably inside its compact and sleek design. Its anti-clog suction feature allows nonstop pumping of water from the bottom and sides of the pump.

Product and warranty info: For reliability and safety, the pump is CSA certified and UL/CUL listed.

Manufacturer Superior Pump
Model 91250
Image Superior Pump 91250 Sump Pump
Type AC-powered submersible sump pump
Suitable for Primary sump pump
Product Details 1/4 HP, 115 volts, 7.2 lbs., 1800 GPH up to 25 feet
Warranty 1 year support warranty



Zoeller M53 Mighty-Mate 1/3 HP Submersible Sump Pump


The Zoeller M53 Mighty-Mate 1/3 HP Submersible Sump Pump is a fool-proof pumping device. When turned on, its automatic aspect watches over the switch. Its specifications are:

  • Product Weight: 21 pounds
  • Horse Power: 1.3 HP
  • Discharge: 1-1/2” NPT
  • Product Dimensions: 7.8 x 10.5 x 10.5 inches
  • Gallons Per Minute: 45 GPM
  • Maximum Speed: 1550 RPM(Rotations Per Minute)
  • Power Cable: 9 Feet
  • Warranty: 1 year

Some important information

Switch: The pump normally activates every 2-3 minutes with a 20 second frequency and can lasts for longer periods up to 3 to 4 years with regards to its usability. This is made of plastic and is quite easily removed through a screwdriver.

Rubber Float Lever Seal: With time the rubber seal/boot will solidify (where the float lever penetrates through the pump cap assemble). This problem is eradicated with the help of a small piece of silicone grease. Also, do not use petroleum based grease. If this fails, the cap assembly then needs a replacement.

Impeller Check Valve: In order to clear/scrape out any built up debris, at regular intervals take out the bottom of the pump (only remove numerous screws), by the exit pipe clear the region and make certain the check valve functions well again.

Flow Holes: Through the impeller and exit pipe in the pump assembly there are two little openings. Over time, these can get clogged and cause a doubtful airlock condition. A nail keeps these openings clear and workable.

Manufacturer Zoeller
Model M53
Image Zoeller M53 Sump Pump
Type AC-powered Automatic submersible sump pump
Suitable for Primary and backup sump pump
Product Details 1/3 HP, 115 volts, 21 lbs., 2700 GPH, 2400 GPH at 10 feet
Warranty 1 year support warranty



Superior Pump 92330 1/3 HP Thermoplastic Sump Pump with Tethered Float Switch


The Superior Pump 92330 1/3 HP Thermoplastic Sump Pump with Tethered Float Switch is created of corrosive resistant thermoplastic and a regulating float switch which automatically switches the pump On/Off. Its specifications are:

  • Product Weight: 9 pounds
  • Horse Power: 1/3 HP, 115 volts
  • Amps: 4.1
  • Discharge: 1-1/4” or 1-1/2”
  • Discharge Type: Top
  • Product Dimensions: 7 x 7 x 13 inches
  • Gallons Per Minute: 40 GPM
  • Switch Type: Tethered
  • Colour: Black
  • Warranty: 1 year manufacturer warranty

Notable product features

This product from Superior Pumps is created from corrosive resistant thermoplastic. It’s easily adjustable float switch automatically switches the pump on or off. The durable and energy efficient pump supports a longer shelf life. Its powerful motor moves water up to 40 gallons per minute and anti-clog suction tethered float switch provides non-stop duty that can lift water to a vertical height of 25 feet. At the base of this utility pump is a suction screen which can whip up water from the ground at 1/8 of an inch. For FMPT purposes it includes a detachable adapter and includes an MNPT discharge. It comes with a useful 10 feet submersible flexible cable and is UL listed.

For its high capacity pumping it supports a large 1-1/4 inches or 1-1/2 inches discharge. This durable, thermoplastic pump thermally protected with a split capacitor motor is created for nonstop duty. Moreover, by a removable float switch this is used like a utility pump.

Manufacturer Superior Pump
Model 92330
Image Superior Pump 92330 Sump Pump
Type AC-powered submersible sump pump
Suitable for Primary sump pump
Product Details 1/3 HP, 115 volts, 9 lbs., 2400 GPH up to 25 feet
Warranty 1 year support warranty



Wayne Water Systems VIP50 1/2 HP 2,500 GPH Submersible Utility Water Pump

wayne water system

The Wayne Water Systems VIP50 1/2 HP 2,500 GPH Submersible Utility Water Pump is a moveable electric water disposable pump for getting rid of water from aquariums, flat roofs, boats, low lying open-air areas, flooded basements, window wells, rain barrels etc. Its specifications are:

  • Product Weight: 7.6 pounds
  • Horse Power: 1/2 HP, 100 volts
  • Amps: 9.5
  • Discharge: 1-1/4”
  • Power Source: Corded Electric
  • Product Dimensions: 6 x 6 x 10 inches
  • Gallons Per Hour: 2600 GPH
  • Switch Type: Manual Switch Type
  • Colour: Black
  • Assembled in: USA
  • Warranty: 1 year

Product features of note

This product from Wayne Water Works can hold any 1/2 inch thick material without clogging. Its base suction technology can remove water to about 1/8 on an inch from the floor and can pump water up to 2500 gallons per hour. Its structure is created from thermoplastic toughened with glass and a non corrosive impeller and volute. For its high capacity pumping the adaptable 3/4 inch discharge adapter fixes to garden hoses very easily and the pumps easily accessible handle provides total transportable features.

This 1/2 horsepower fully submersible utility water pump can remove water from within 1/8 of an inch from the ground. However, the least amount of water level should be two 5/8 inch, to activate the pump. It comes with a 1 year warranty period.

Benefits of the product

  • Completely waterproof
  • Holds filthy water at 1/2 inch thickness
  • Bottom suction, anti clogging facility
Manufacturer Wayne
Model VIP50
Image Wayne 9VIP50 Sump Pump
Type AC-powered submersible sump pump
Suitable for Primary sump pump
Product Details 1/2 HP, 100 volts, 7.6 lbs., 2400 GPH, 1550 GPH at 10 ft.
Warranty 1 year support warranty

Choosing the Best Sump Pump

There are hordes of popular Sump Pumps available on the market. However, help is provided in this long and lengthy dreadful task in advance.

  • Deciding the appropriate type of sump pump and avoid purchasing the wrong type. Time is precious and there’s no patience to run through hordes of sump pump reviews. So, help is at hand and the various types of sump pumps that work in one’s best interests are checked out. Either the best battery backup or best submersible sump pump, there’s got to be the ideal sump pump being searched for. Mistakes are surely avoided this way.
  • Compare easily the amount being spent. An investment is being made. So, spend on a good brand that fits the budget. Nobody wants a pump that’s a failure and waste their hard earned money.
  • The journey to the best sump pump is easier now. The work of searching through sump pump reviews all by oneself is made much easier with the Internet at your disposal.

Moreover, all one needs to know is right in here. Why read-through and trouble yourself with this page, when there are hordes of sump pump reviews available?

  • Brands doing well are already checked out. Knowing the best sump pump products is not sufficient. What consumers are saying about the product, whether they are satisfied with their product, one ought to know this. The best answers have been provided through investigations.
  • One doesn’t need any research done since everything is known. The various reviews of the sump pumps can ultimately get confusing. Why go through all the hassle when everything about one’s choice can be read straightaway. There’s no need to waste time and energy since the hard work has already been done.

The task of eliminating a flooding situation is certainly not an easy task. Make a comparison with the repair cost of the home’s foundations and the repair cost of replacing the damaged couch, carpet or television. If purchasing a sump pump is the cheapest alternative, then go for it.

What one really requires to do is think about the type that is actually required. What is the volume of flooding more often handled? The amount of money being spent and if installed single-handedly? The size, durability and suction power has to be considered too. Naturally, a much powerful sump pump would be required for a deeper sump pit. If by submerging the pump, will it not easily corrode and remain durable too. When purchasing the pump, one should think about these three vital considerations.

For long lasting operations, characteristics such as vortex filtration system or cast iron coating are a guarantee.

How To Install Sump Pump